Home Improvement Made Simple – Tips And Tricks!

Home Repair Made Simple – Tips And Tricks!

It’s important to keep your home functional and looking good whether you plan to stay in it or sell it. Little things can make your home worth more. This article is going to go over some of the things that you can do to make your home more improved.

When working with a contractor to do a home renovation or even if you need water damage repair, decide on the whole project at the beginning and stick to that plan. Constantly changing the plan can slow down the renovation process and scare off your contractor from doing anything independently. Also, constantly changing renovations often end up looking piecemeal, since they weren’t created with a clear vision in mind.

Replace old and outdated sliding glass patio doors with french doors. The look is bold and modern, something that new buyers will really appreciate. It’s the kind of small touch that is quick, easy, and inexpensive but will give you the most bang for your hard earn buck.

An easy and cost effective way to spruce up your home is by painting the interior. To estimate the amount of paint you need, you have to calculate the square footage of the walls. Simply multiply the length of the wall by its height. One gallon of paint will cover approximately 350 square feet. Bear in mind that you may need two coats of paint, depending on what color you are painting over.

When it comes to home improvement, it is important to realize that the more customized your have, the less likely it will be appreciated by your future buyers. If you are concerned about the resale value of your house, it is important to appeal to the general public as opposed to your own tastes.

Avoid making expensive renovations based on personal tastes. Spending $1,000 a tile on your bathroom may seem like a good plan but the odds are if you eventually sell, you will not recoup that money. If the change is not something that can be appreciated by someone other than you, consider doing something different.

Make puncture holes in paint can rims with a nail. This lip on the paint can will fill with paint, when replacing the lid it can cause the paint to spill over. With a nail, put several holes in paint can’s perimeter, in the bottom of that channel, to avoid a problem.ne

Never lose sight of how important good home improvements can be. Applying just a couple of days of hard work to your home can dramatically alter its appearance for the better. With the information in this article safely stored in your mind, you can get started right away on a project. Choose a project and begin today!

Continue Reading

Easy Answers To Your Tough Plumbing Questions

Easy Answers To Your Tough Plumbing Questions

Though water is one of the earth’s vital elements, it can cause major trouble for anyone battling plumbing issues in their home. Except for a natural disaster, there are only a few problems which can cause more extensive damage than a plumbing issue. Thankfully, it doesn’t take expert knowledge to repair a problem and keep your plumbing system well maintained so that future issues are prevented.

Check the filters in your furnace, regularly. If these filters have not been cleaned or replaced recently, they may become clogged. This will affect how well your furnace is able to work, meaning that you may not have enough heat during the winter. Take this simple step, as soon as the weather starts to become cold.

Roots from a tree in your back yard can be a real headache when it comes to plumbing. Make sure if you have a big tree or bush or some kind of plant with a big root system, that you ask your plumbing company about root killing agents. You can flush these down your toilet and kill any roots that may be blocking your pipes and save yourself a lot of money by stopping a back up before it happens.

Don’t pay the entire plumbing bill upfront; wait until the plumber finishes the plumbing job. There might be a down payment required, but you do not give him the total cost before he is finished. It is vital that you check your plumber has done all the work he promised before you have over the full payment. This will protect you against being scammed by fraudulent tradesmen.

Use a hairdryer to thaw frozen pipes, after you shut off the water to the house. A hairdryer will gently heat the pipe and thaw the ice without causing significant damage to the pipe. Shutting off the water first means that if the pipe is broken, there will be no rush of water into the house.

To avoid wasting water and having a potentially high water bill, check your home for leaky faucets periodically. Fix any leaks that you find right away. You may be able to do the repair yourself, but if not, you may have to seek the services of a plumber to make the repairs.

Find a better way to discard of cooking oil instead of pouring it down the drain where it can easily clog your pipes. Keep a coffee can or other metal container handy to pour grease into after cooking. Place the can in the freezer to harden the grease and when it’s full, discard it with the trash.

Making sure you know all of your problems so you can have them fixed by one plumber visit is very beneficial. Having them all fixed in one visit takes a lot of money off of your bill because you don’t have to pay for the visit multiple times so make sure you make a list first.

Don’t shrug off that trickle coming from your toilet as a small problem. Even the tiniest leak can be quite expensive in the long run as you end up wasting potentially hundreds of gallons of water. See if you can find the root of the leak, or seek out professional advice, and keep your toilet running efficiently.

If you are using PEX tubing for the supply lines in your home, make sure you get the right tools for the job. PEX tubing requires a completely different tool type than regular lines. PEX has a lot of benefits though, so don’t let the different requirements throw you off.

Do not ignore a slow flushing toilet. This is usually a sign that something is wrong. It can also cause backups and overflows. The most common causes of a slow flushing toilet are sediment build up, tank malfunctions, or partial clogs. You should periodically check for these problems.

If you live in an area that sees routine freezing temperatures, make sure you do something to keep your pipes from becoming frozen as well. There are a wide variety of ways you can keep your pipes from freezing, which will help you avoid damage to your home and costly plumbing repair.

One way to prevent water heater problems is to turn down the heat. As long as the water is still as hot as needed for showers and washing dishes, turning it down won’t hurt anything, and will extend the life of the heater. Holding very hot water can corrode the inside.

When you’re going away on a vacation, you should consider shutting off the water supply to your home. This can help stop many problems before they start. If you don’t do this, you should have someone stop by your house regularly to check that nothing has gone wrong and that your home isn’t flooded.

To make sure there is no accident or sudden rush of water when you tackle a plumbing project, make sure you are ready for a cleanup. If you go into the work with a huge stack of towels and blankets ready to absorb water, the prospect of needing to actually do it will keep you alert enough to avoid triggering the accident in the first place.

The most important plumbing tip you need to know is — how to turn off your home’s main water supply. Once the water is shut off, you can investigate problems and figure out how to resolve them. Walk the family through the house and show them where all the water shut-off valves are, and how to use them.

Watch out for decreased levels of intensity in the water flow in your bathroom. This can be a sign of calcium or mineral deposits disrupting water flow. If spotted early enough it may be possible to remedy this without having to replace the pipes.

Being properly informed and ready for any situation makes it much easier to avoid problems with plumbing. By learning more about plumbing, a homeowner can make the right decisions and reduce the chance of plumbing problems. It goes without saying that someone who has done research and is prepared before a problem arises will be better capable of fixing things faster.

Continue Reading

hardware & Fasteners

Learning Objectives:• The features and benefits of the products you sell.• How to answer your customers’ product-related questions.• How to help your customer choose the right products.• How to increase transaction sizes by learning more about add-on sales and upselling techniques.Product Knowledge:Chapter 1: FastenersModule 1: ScrewsSheet Metal Screw• This screw fastens thin metal to thin metal.• It is threaded its entire length.• Can have flat, oval, round or binding heads.• Typical lengths range from 1/8” to 2”.• Starting holes are either drilled or punched and should be slightly smaller than the screw diameter.Machine Screw• Intended to be screwed into pre-threaded holes in metal.• Another type is a Thread-Cutting Machine Screw, which has a head that cuts its own threads as it goes into a hole.• May look like a bolt, but user drives it with a screwdriver instead of a wrench.• Thread is measured in threads per inch, or tpi. Comes in coarse (24 threads per inch) and fine (32 threads per inch) sizes.• Can have round, oval, flat and fillister heads. Before we get into the different types of screws(also see wholesale fasteners), let’s take a look at the different types of head styles and drive types. The head style refers to the shape of the head. The drive type refers to the type of driver needed to secure the fastener.Here are the Head Styles:• Flat• Oval• Pan• TrussHere are the Drive Types:• Phillips• Slotted• Combination• Round• Hex• Hex Washer• Hex• Torx• Square.

Continue Reading